INSTRUCTIONS:
1. Back to Nature Safer Deglosser should be used full strength.
2. Clean off surface dirt using a damp cloth.
3. Spray Back to Nature Deglosser onto the surface.
4. Work in with a brush or pad if necessary.
5. Allow Back to Nature Safer Deglosser to dwell on the surface approximately 10-15 minutes.
6. While surface is still wet, wipe down with a dry cloth. If Back to Nature Safer Deglosser had dried on the surface, wipe down with a wet sponge and allow to dry.
7. Let dry approximately 1 hour before applying new finish.
8. Inspect visually. Use second application when necessary.
SAFETY INSTRUCTIONS: Safety goggles or face shield are recommended for eye protection. Rubber gloves are recommended. In case of eye contact flush with plenty of cool water for 15 minutes, lift lids, do not rub. Get medical attention. In case of ingestion, drink water or milk to dilute. Do not induce vomiting. Get medical attention immediately.
|
|
|
.jpg)
